Soundlab is a three way floorstanding speaker.
Soundlab is a bass-reflex cabinet loudspeaker with drivers of Omnes Audio and Tang Band.
The kit is delivered with the following drivers: - a Omnes Audio T25 H tweeter - a Tang Band W3-315 mids driver - a Tang Band W5-1138 SMF woofer
The loudspeaker has been developed by Markus Kluge and Michael Merkl.
The crossover consists of: - a 2nd order high-pass filter (12 dB per octave slope) for the tweeter. - a band pass consisting of a 2nd order high pass filter (12 dB per octave slope) and a 2nd order low-pass filter (12 dB per octave slope) for the mids-woofer. - a 3rd order low-pass filter (18 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum is nearly perfect.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,7% above 300 Hz and doesn't exceed 1,1% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right), to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 301,00 excl. VAT: € 252.94 / $ 273.18
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Omnes Audio T25 H are of type polypropylen (MKP) Clarity-Cap ESA 630 V.
Kit with high-end-crossover without cabinet, price per speaker on request
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
Price per impedance correction for one speaker, to be mounted on a small wooden board. EUR 14,80 excl. VAT: € 12.44 / $ 13.43
If you prefer to mount the crossover components on a universal PCB instead on wood PCB 220x155 mm, order no. I-8805002, price per unit: EUR 11,80 excl. VAT: € 9.92 / $ 10.71 We recommend two boards per kit (four boards for a speaker pair)
Home Klang+Ton Overview