Aluminata 130/2 KE   Floorstanding as in Hobby Hifi 6/2021

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 88 dB
  • size (HxWxD): 1100 x 220 x 330 mm
  • frequency range (-8dB): 32 - 25000 Hz
  • crossover frequency(s): 2000 Hz
  • speaker type: bass reflex

Aluminata 130/2 KE is a two way compact speaker.

Aluminata 130/2 KE is a bass-reflex cabinet loudspeaker with drivers of Visaton .

The kit is delivered with the following drivers:
- a Visaton KE 25 SC, 8 Ohm tweeter
- two Visaton AL 130, 8 Ohm woofers

The loudspeaker has been developed by Bernd Timmermanns.

The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 3rd order low-pass filter (18 dB per octave slope) for the woofer.

The frequency response of this speaker is perfectly linear.

The decay spectrum is perfect.

At medium volume, i.e. 90 dB at 1 m, the nonlinear distortions are below 0,2% above 200 Hz.

Our kit consists of

  • Visaton KE 25 SC, 8 Ohm
  • 2x Visaton woofer AL 130, 8 Ohm
  • 1,5x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • 0,5x Damping Sonofil 100 x 35 cm for 20 litres
  • 0,5x Audaphon Damping 10, 970 x 470 mm, adhesive
  • Binding Post PK31, gold plated (one pair, red and black)
  • 3m Speaker cable 2x2.5 mm2, transparent
  • 1,5x Pan screws 4x20 black, torx, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 5.6 μF / 400 Vdc
  • Audaphon MKP CAP Superior 10 μF / 400 Vdc
  • Audaphon MKP CAP Superior 12 μF / 400 Vdc
  • Audaphon MKP CAP Superior 15 μF / 400 Vdc
  • Mundorf, electrolytic capacitor, etched, 560 μF/63 Vdc
  • Mundorf air core coil L140, 0.33 mH/0.15 Ohm
  • Mundorf air core coil L140, 0.68 mH/0.26 Ohm
  • 0.7 mm air core coil, 0.33 mH/0.48 Ohm
  • 0.7 mm air core coil, 10 mH/3.85 Ohm
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)
  • Metal-oxide resistor, 5W 2.2 Ohm (red-red-gold)

Kit without cabinet, price per speaker   EUR 686,00 excl. VAT: € 576.47 / $ 622.59

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Visaton KE 25 SC, 8 Ohm are of type polypropylen (MKP) Mundorf MCAP EVO Silver Gold Oil 450 V.

  • Mundorf MCAP EVO Oil 27 μF / 450 V
  • Mundorf MCAP EVO Silver Gold Öl 5.6 μF / 450 V
  • Mundorf MCAP EVO Silver Gold Öl 10 μF / 450 V
  • Mundorf, electrolytic capacitor, etched, 560 μF/63 Vdc
  • Mundorf baked varnish air core coil BL71, 0.33 mH/0.48 Ohm
  • Mundorf baked varnish air core coil BL71, 10 mH/3.62 Ohm
  • Mundorf baked varnish air core coil BL140, 0.33 mH/0.15 Ohm
  • Mundorf baked varnish air core coil BL140, 0.68 mH/0.23 Ohm
  • Mresist Classic 3,3 Ohm / 10 Watt
  • Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)
  • Metal-oxide resistor, 5W 2.2 Ohm (red-red-gold)

Kit with high-end-crossover without cabinet, price per speaker   EUR 895,00 excl. VAT: € 752.10 / $ 812.27

Impedance correction for 40W amplifier

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • Audaphon MKT CAP 47 μF / 160 Vdc
  • ceramic resistor 6.8 Ohm/20 Watt

Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 13,90 excl. VAT: € 11.68 / $ 12.62

Impedance correction for any amplifier

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • Audaphon MKT CAP 47 μF / 160 Vdc
  • 4x ceramic resistor 6.8 Ohm/20 Watt

Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 19,00 excl. VAT: € 15.97 / $ 17.24

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:   EUR 5,90 excl. VAT: € 4.96 / $ 5.35
We recommend one board per kit (two boards for a speaker pair)


Home   Hobby HiFi Overview