CT 323   Shelf speaker as in K+T 5/2022

Technical data
  • impedance: 6 Ohm
  • sensivity (2,83V/1m): 90 dB
  • size (HxWxD): 320 x 90 x 170 mm
  • frequency range (-8dB): 150 - 20000 Hz
  • crossover frequency(s): Hz
  • speaker type: closed box

CT 323 is a two and a half way compact speaker.

CT 323 is a closed-cabinet loudspeaker with drivers of Visaton .

The kit is delivered with the following drivers:
- Visaton FRS 5X, 8 Ohm full range drivers

The loudspeaker has been developed by Thomas Schmidt.

The crossover consists of:
- a first order high-pass filter (6 dB per octave slope) for the full range driver.
- a first order low-pass filter (6 dB per octave slope) for the bassrange full range drivers.

The frequency response of this speaker is nearly linear.

The decay spectrum (waterfall spectrum) shows a decelerated swing-out behaviour in the mid-range.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,6% above 400 Hz and doesn't exceed 1,2% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • 5x Visaton FRS 5X, 8 Ohm
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • 0,25x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 2m Speaker cable 2x1.5 mm2, transparent

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKT CAP 68 μF / 160 Vdc
  • Mundorf H core coil H100, 3.3 mH/0.27 0hm
  • Mundorf H core coil H100, 4.7 mH/0.34 0hm

Kit without cabinet, price per speaker   EUR 133,00 excl. VAT: € 111.76 / $ 120.71

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Visaton FRS 5X, 8 Ohm are of type polypropylen (MKP) Clarity-Cap PX 250 V.

  • ClarityCap PX capacitor 68 μF / 250 Vdc
  • Mundorf H core baked varnish coil BH100, 3.3 mH/0.26 0hm
  • Mundorf H core baked varnish coil BH100, 4.7 mH/0.34 0hm

Kit with high-end-crossover without cabinet, price per speaker   EUR 167,00 excl. VAT: € 140.34 / $ 151.56

universal PCB

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. str-RA140, price per unit:   EUR 4,20 excl. VAT: € 3.53 / $ 3.81
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview