Frequenzweichenbausatz für JBL L100 Century   Shelf speaker as in K+T 2/2020

Technical data
  • impedance: 6 Ohm
  • sensivity (2,83V/1m): 89 dB
  • size (HxWxD): 570 x 49 x 32,7 mm
  • frequency range (-8dB): 35 - 20000 Hz
  • crossover frequency(s): 550, 5500 Hz
  • speaker type: bass reflex

From K+T created crossover kit for JBL L100 Century.

The kit is delivered with the following drivers:
! The chassis er not included in the kit
- a JBL LE25 tweeter
- a JBL LE5A mids driver
- a JBL 123A woofer

The loudspeaker has been developed by JBL and Thomas Schmidt (the crossover-kit).

The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a band pass consisting of a 2nd order high pass filter (12 dB per octave slope) and a 2nd order low-pass filter (12 dB per octave slope) for the mids-woofer.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is nearly perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 400 Hz and doesn't exceed 1,9% at 95 dB at 1 m between 300 and 15000 Hz.

Our crossover kit consists of

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 2.2 μF; / 400 Vdc
  • Audaphon MKP CAP Superior 15 μF; / 400 Vdc
  • Audaphon MKT CAP 6.8 μF; / 160 Vdc
  • JB, electrolytic capacitor, bipolar advanced, 47μF / 50 Vdc
  • 1.0 mm air core coil, 0.82 mH/0.44 Ohm
  • 0.7 mm air core coil, 0.22 mH/0.39 Ohm
  • Mundorf bs140 core coil 3.9mH/0.21Ohm
  • Mundorf H core coil H100, 1.2 mH/0.15 0hm
  • 2x Metal-oxide resistor, 10W 5.6 Ohm (green-blue-gold)
  • Metal-oxide resistor, 10W 12 Ohm (brown-red-black)
  • Metal-oxide resistor, 10W 15 Ohm (brown-green-black)

Crossover-kit, price per speaker   EUR 92,00 excl. VAT: € 77.31 / $ 83.50

Kit high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the JBL LE25 are of type polypropylen (MKP) Clarity-Cap CSA 630 V.

  • ClarityCap SA capacitor 15 μF; / 630 Vdc
  • ClarityCap CSA capacitor 2.2 μF; / 630 Vdc
  • Audaphon MKP CAP Superior 6.8 μF; / 400 Vdc
  • Audaphon MKT CAP 47 μF; / 160 Vdc
  • Mundorf baked varnish air core coil BL71, 0.22 mH/0.34 Ohm
  • Mundorf baked varnish air core coil BL100, 0.82 mH/0.45 Ohm
  • Mundorf bs140 core coil 3.9mH/0.21Ohm
  • Mundorf H core baked varnish coil BH100, 1.2 mH/0.15 0hm
  • 2x Metal-oxide resistor, 10W 5.6 Ohm (green-blue-gold)
  • Metal-oxide resistor, 10W 12 Ohm (brown-red-black)
  • Metal-oxide resistor, 10W 15 Ohm (brown-green-black)

Kit high-end-crossover, price per speaker   EUR 146,00 excl. VAT: € 122.69 / $ 132.50

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).

  • Audaphon MKT CAP 1.5 μF; / 160 Vdc
  • Audaphon MKT CAP 8.2 μF; / 160 Vdc
  • Audaphon MKT CAP 10 μF; / 160 Vdc
  • 0.7 mm air core coil, 0.82 mH/0.89 Ohm
  • Mundorf H core coil H71, 4.7 mH/0.46 0hm
  • ceramic resistor 10 Ohm/20 Watt
  • ceramic resistor 12 Ohm/20 Watt

Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 31,80 excl. VAT: € 26.72 / $ 28.86

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,80 excl. VAT: € 9.92 / $ 10.71
We recommend one board per kit (2 boards per speaker pair)


Home   Klang+Ton Overview