Melodie 8018   Floorstanding as in K+T 1/2021

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 87 dB
  • size (HxWxD): 980 x 380 x 150 mm
  • frequency range (-8dB): 36 - 30000 Hz
  • crossover frequency(s): Hz
  • speaker type: passive radiator
Enlarge

Variant Melodie 8018 is a two way floorstanding speaker.

Variant Melodie 8018 is a loudspeaker with drivers of Mundorf and Dayton. Passive radiators provide deep bass.

The kit is delivered with the following drivers:
- a Mundorf AMT U80W1.1 air motion transformer (ribbon-tweeter)
- a Dayton Audio RS180P-4 midrange / bass driver

The loudspeaker has been developed by Michael Schmitz and Thorsten Fischer.

The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the mids-woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is nearly perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,4% above 250 Hz and doesn't exceed 0,4% at 95 dB at 1 m between 300 and 15000 Hz.

Our kit consists of

  • Mundorf AMTU80W1.1
  • Dayton Audio RS180P-4 7 inch Reference Paper Midwoofer 8 Ohm
  • 2x Dayton Audio DSA 175-PR
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • Damping Sonofil 100 x 35 cm for 20 litres
  • Terminal T105 Au, with brass, gold plated
  • 2,5m Speaker cable 2x1.5 mm2, transparent
  • 3x Pan screws 3.5x17 black, torx, 8 pieces
  • 55x Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Mundorf MCAP EVO 12 μF / 450 V
  • Mundorf, electrolytic capacitor, unetched, 6.8 μF / 70 Vdc
  • Mundorf, electrolytic capacitor, unetched, 22μF / 70 Vdc
  • Mundorf baked varnish air core coil BL140, 0.68 mH/0.23 Ohm
  • Mundorf air core coil L50, 2.7 mH/2.81 0hm
  • 0.7 mm air core coil, 0.27 mH/0.44 Ohm
  • Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
  • 2x Metal-oxide resistor, 10W 2.7 Ohm (red-purple-gold)
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)

Kit without cabinet, price per speaker   EUR 529,00 excl. VAT: € 444.54 / $ 480.10

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Mundorf AMT U80W1.1 are of type polypropylen (MKP) Clarity-Cap PWA 160.

  • ClarityCap CSA capacitor 12 μF / 250 Vdc
  • Audaphon MKT CAP 6.8 μF / 160 Vdc
  • Audaphon MKT CAP 22 μF / 160 Vdc
  • Mundorf copper foil coil CFC16-0.68mH/0.26Ohm
  • Mundorf baked varnish air core coil BL71, 0.27 mH/0.45 Ohm
  • Mundorf air core coil L50, 2.7 mH/2.81 0hm
  • Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
  • 2x Metal-oxide resistor, 10W 2.7 Ohm (red-purple-gold)
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)
  • Metal-oxide resistor, 10W 4.7 Ohm (yellow-violet-gold)

Kit with high-end-crossover without cabinet, price per speaker   EUR 540,00 excl. VAT: € 453.78 / $ 490.08

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit:   EUR 5,10 excl. VAT: € 4.29 / $ 4.63
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview