Copernicus Subwoofer   L'enceinte murale de K+T 2/2022

Fiche technique:
  • Impédance nominale: 4 Ohm
  • Sensibilité (2,83V/1m): aktiv dB
  • Dimensions (HxLxP): 600 x 600 x 300 mm
  • Réponse en fréquence (-8dB): 25 - 300 Hz
  • Fréquence(s) de coupure: 300, 2150 Hz
  • Principe: charge close

Copernicus Subwoofer est un caisson de basse polyvalent, offrant un soutien puissant et étendu à vos enceintes.

Copernicus existe en cinq versions :

Copernicus Subwoofer est une enceinte close, utilisant des haut-parleurs Wavecor .

Le kit comprend un boomer Wavecor SW275BD01

L'enceinte a été développée par Dennis Frank et Daniel Gattig.

Le filtre est composé:

Un extrait de la revue Klang+Ton (translation of author (Traduction de l'auteur en anglais)

"The Copernicus´ performance with the free-field setting directly in front of the wall is impressing, but in the long run it is clearly too powerful. So I first turned the bass department down by about 6 decibels - that´s better. The impression of infinitely deep and dynamic bass is retained, but it doesn't immediately jump in the listener's face (or stomach). This impression extends over the entire audible frequency range: you can clearly hear that there is significantly more membrane area in every position than with your standard loudspeakers. And because the whole thing is so beautifully linear and without any distortion, you can always get really loud without stressing your ears - very good! When it comes to home cinema, things are going just as well... I caught myself stepping on the gas on the subs for the correct doomsday soundtrack à la "Independance Day" or "2012" - but then that's not entirely possible without worrying about the building´s structural integrity…. "

Le verdict du magazine Klang+Ton

" Perfectly tuned wall box with an integrated subwoofer solution that leaves no desires whatsoever. "

"High-end tip"

Notre kit se compose de

  • Boomer Wavecor SW275BD01, à saladier en fonte, 4 Ohm
  • Hypex FusionAmp FA252
  • 3x Matériau amortissant Sonofil 100 x 35 cm pour 20 Litres
  • 1,5x Vis Pan 4x20 noir, torx, 8 pièces
  • Vis à bois à tête cylindrique 5x30mm, noire, 8 pièces
  • Plan de montage pour le kit

Composants sans ébénisterie, prix par unité   EUR 1260,00 hors TVA: € 1058.82 / $ 1143.53

Prix pour une paire de haut-parleurs personnalisés de n'importe quelle couleur   EUR 4380,00 hors TVA: € 3680.67 / $ 3975.13

Notre kit se compose de

  • Boomer Wavecor SW275BD01, à saladier en fonte, 4 Ohm
  • 3x Matériau amortissant Sonofil 100 x 35 cm pour 20 Litres
  • 2x Bornier PK28 I plaqué or (la paire, 1 rouge + 1 noire)
  • 2m Câble haut-parleur 2x2,5 mm2, noire/rouge
  • Vis à bois à tête cylindrique 5x30mm, noire, 8 pièces
  • Plan de montage pour le kit

Composants sans ébénisterie, prix par unité   EUR 714,00 hors TVA: € 600.00 / $ 648.00


Retour vers la page d'accueil   vers les kits de Klang+Ton